Grub4dos Windows Xp Install Iso
The option default is No but if you are using the then it needs to be set to Yes, so that Setup regards this installation as a distribution and copies these files over to the system drive. This occurs at the end of Text-mode Setup.Having OemPreinstall set to Yes will also prevent you from loading RAID/SATA drivers from a floppy disc during textmode setup. The only workaround for that problem is to directly integrate the drivers into the CD, as described.So we have a Catch 22 situation. E2B needs this to be set to No so that it can install the FiraDisk driver so that XP can access the ISO as a virtual CD drive, but if there is a $OEM$ folder in the XP Install ISO, the contents of the $OEM$ folder will not be copied to the hard disk. Consequently, some features, programs, documents and configuration settings, etc.
That were in the $OEM$ folder may not be applied to the final XP installation. It may be that adding to the i386winnt.sif to include the lines in bold below, might also have fixed this issue:DataAutoPartition='0'MsDosInitiated='0'UnattendedInstall='Yes'win9xupgrade='no'winntupgrade='no'EulaComplete='1'Once you have a working USB Flash drive made by Rufus, convert it to a.imgPTN file using the Easy2Boot MPI Tool Kit (make sure there is no pagefile.sys file on it first!) and then copy the.imgPTN file to your E2B USB Flash drive. Note however, that unless the ISO has added mass storage drivers, you will only be able to install to IDE systems, whereas if you use E2B+DPMS and the ISO file, you can install to a much wider range of SATA/SCSI/RAID systems.To boot XP using the CSM boot menu, you I needed to edit the menu.lst file in the.imgPTN file (easiest way is to select the.imgPTN file and switch partitions and then use Windows Explorer to access the menu.lst in the new partition). Additional CSM menu entry:title Install Windows XPnInstall XP from a Rufus imagemap (hd0) (hd1)map (hd1) (hd0)map -hook# set root drive as the E2B USB drive which is now hd1root (hd1,0)# Rufus uses the file called bootmgr (which is ntldr renamed)chainloader /bootmgrNote that when I used a E2B Removable Flash USB drive this worked fine, however if the E2B USB drive was a USB HDD (I tried both a 2TB WD and a 230GB SSD E2B drive), Setup could not find the install files on the USB HDD during Stage 2 GUI mode setup. Windows XP did not assign a drive letter to the USB HDD drive for some reason although DISKPART listed the USB drive.
Other Rufus stuff. MicroXP Pro v1.11b seemed to complete the Setup process OK, but even installing from an ISO in VBox (i.e.
Not using E2B) or Rufus Flash drive via VBox, it did not seem to be fully working (e.g. 7Zip had no file association and the Theme was not applied and many Desktop icons used in the install were left on the Desktop). Installing from a Rufus Flash drive onto a real IDE system did work however. You could extract the whole $OEM$ folder from the ISO first using 7zip and copy it to a folder on the E2B USB drive (e.g. Then after XP has been installed onto your target drive using E2B, you can copy the files from the $OEM$ folder to your XP drive.
Grub4dos Windows Xp Install Iso Image
Use as a guide as to where to copy each folder to - for instance if there is a $OEM$ $$Web folder, it should be copied to C:WindowsWeb folder on your new XP installation, a $OEM$$DocsAll Users folder should be copied to C:WindowsDocuments and SettingsAll Users. $OEM$$1 folders will go to the C: drive. This was a lot of extra faff!It is obvious that to support installing from a USB Hard Disk, extensive patching of the XP install files is required! For more reading see.WinSetupFromUSB works!Next I tried WinSetupFromUSB and specified a spare 80GB NTFS USB Hard Disk which I had available as the target drive. The resulting USB HDD made from the MicroXP Pro 1.11 ISO (mounted by ImDisk as a Virtual CD so WinSetupFromUSB could access the files) was then used to boot an Asus EeePC IDE netbook and the XP install proceeded perfectly. The $OEM$ files were copied and the XP Desktop was installed correctly during post-install.WinSetupFromUSB used a modified txtsetup.sif file which added the required USB drivers to XP.I then made a.imgPTN file from the WinSetupFromUSB drive and added it to my E2B drive.The WinSetupFromUSB menu.lst file can be merged into the CSM menu.lst file (you should be prompted to combine the menus by MakePartImage).To install XP, I first chose the WinSetupFromUSB 'Auto Detect and use F6 SATA/RAID drivers' menu option and then the Step 1 menu option. The textmode setup stage appeared to proceed normally.
Convert legacy V2.1 SKD files to DWG. Although it looks like AutoSketch is no longer offered by Autodesk, it has GOT to be better. Files, that is unless Autodesk take pity on me and writes a utility to do mass-conversions!!! Autosketch skd converter weight.
I rebooted and chose Step 2 and the GUI Setup stage started and all proceeded perfectly.So here is my recommended solution for those 'special' automated XP Install ISOs.How to add a non-standard XP Install ISO to E2B. Click on GO to make the USB drive6. Drag-and-drop the USB drive letter/icon onto the MPINTFS Windows Desktop shortcut, specify a destination path (e.g. C:tempXPWinsetup.imgPTN) and when prompted, choose the Combine option to combine WinSetupFromUSB's menu.lst with the MPI CSM menu.Note: If there are System Volume Information and $Recycle.BIN folders on the drive, it may cause problems with the MakePartImage or produce a larger.imgPTN file than is necessary, so to avoid this, copy all the other files and folders to an empty folder on your system disk (e.g. C:tempWinSetXP) and drag-and-drop that folder onto the MPINTFS shortcut.7. Copy the resulting XPWinsetup.imgPTN file to the (for example) ISOMAINMENU or ISOWIN folder of your E2B USB drive (Flash drive or USB HDD).Notes: WinSetupFromUSB moves the files and folders to a WINSETUP folder - e.g. Some modified installs will look for these files and folders in the root of the drive once XP has been installed, in order to install more software once it reaches the Desktop.
In the above case, copy all three WINxxxx tag files to the root of the.imgPTN image.Also, copy the whole $OEM$ folder to the root.If you still get errors after installation, if there are any other folders present in this folder (not I386 or BOOT) then you may also need to copy them to the root too.How to install XP onto another system1. Connect the E2B USB drive to the target system and boot from it to the Main menu2. Select the XPWinsetup.imgPTN menu entry to get to the CSM menu3. In the CSM menu, choose the Windows XP/2000/2003 Setup menu option4. If the target system contains a non-IDE hard disk (e.g.
SATA/RAID/SCSI) run the Auto-detect and use F6 SATA/RAID/SCSI Driver menu option5. Now choose the First part of Windows XP setup menu entry and proceed with the normal XP textmode setup process until it reboots.6. Reboot back to the E2B USB drive again (don't boot from the internal hard disk yet!) and select the Second part of Windows XP setup menu option to start the 2nd GUI install stage.7. Allow it to reboot from the internal hard disk to complete the install.8. You can modify the CSM menu.lst file to change the menu colours and remove any menu options you don't want. You can also add the winsetup.lst menu contents into the menu.lst menu if you wish and remove the 'title Windows XP/2000/2003 Setup menu' entry.Notes:. Older versions of XP ISOs complained about not being able to validate and would not allow the Desktop to load on the final reboot.
WinSetupFromUSB FAQPlease ensure that you only install XP onto a legally licensed system such as systems with an XP Pro or Vista Pro Certificate of Authenticity sticker on them (or if your establishment has the correct Volume Licence agreement) which can be legally installed with XP Pro.P.S. Please tick one of the feedback boxes if you found this useful and subscribe to this blog.
Grub4dos Windows Xp Install Iso Version
Windows XP was released to the public on October 25, 2001, the first two versions released by the company were Home and Professional. The Home version was targeted to home PC users, while the Professional version was designed for business and professionals. Prior to Windows 7 market dominance, Windows XP was the most widely used desktop operating system in the world for many years.Professional version of the operating system have more features such as backup program, encrypted file systems (EFS) feature, remote control, offline files, IIS, etc. While these features are not available in the Home version.
Grub4dos Windows
General information for all XP editionsWindows XP has a lot of updates in the user interface (compared to and ), making it easier to use and navigate through files and programs. The appearance of windows shell elements such as desktops, taskbar, start menu, get a better design with transparent icons and shadow drops. The Start menu gets two columns, and now it is completely customizable by the user.